BLOG2026-11-17T21:23:02+00:00

SEES / BLOG

Electrical tips for South Florida homeowners.

What Causes Electrical Fires at Home? Four Risks and the Warning Signs

November 18th, 2026|

A breaker trips when you run two kitchen appliances at once. In another room, an outlet keeps working even though the plug fits loosely and the wall plate feels warm. Both deserve attention, but the second problem can develop without a breaker ever tripping. At Statewide Electric & Environmental Solutions (SEES), we believe electrical safety starts with knowing what to look for. The National Fire Protection Association estimates that U.S. fire departments responded to about 46,650 home electrical structure fires per year from 2020 through 2024. Electrical distribution, lighting, or power transfer equipment was involved in starting 47% of those fires. 1. Loose or worn electrical connections A loose wire at an outlet, switch, or breaker terminal can create resistance where two metal surfaces meet. The same thing can happen when a plug fits poorly in a worn outlet. As electricity flows through the poor connection, heat can build up in one small spot. The connection can also arc. Enough heat can damage insulation and ignite nearby materials. U.S. Consumer Product Safety Commission research The breaker can stay on while the connection overheats. A [...]

What Can an Exterior Thermal Scan Reveal About Your Home’s Electrical Equipment?

November 18th, 2026|

Electrical equipment produces heat while operating. Sometimes, an unusual temperature pattern on the outside of an enclosure can give an electrician a reason to recommend further evaluation. An exterior thermal imaging screening helps us look for those surface patterns while keeping equipment closed. How does thermal imaging work? A thermal camera detects infrared energy and displays an image of apparent surface temperatures. Different colors help show warmer and cooler areas. During an exterior screening, an electrician scans the outside of accessible electrical equipment. In some circumstances, heat generated inside transfers to the cover and creates a detectable surface pattern. The electrician considers the pattern alongside operating conditions. Normal equipment operation, sunlight, and other environmental conditions can affect the readings. What can an exterior scan tell you? An exterior scan may reveal unusual surface heating that warrants further investigation. It provides information about conditions at the time of the visit. Thermal cameras cannot see through metal covers. Internal problems may produce no detectable heat pattern outside, particularly when equipment is carrying a light electrical load. Surface materials, weather, sunlight, and obstructions can also affect the [...]

Why Does My Circuit Breaker Keep Tripping?

November 17th, 2026|

If the power cuts out every time you run the microwave and toaster together, the circuit may be overloaded. If the breaker trips again as soon as it’s reset, there may be an electrical fault. When you call an electrician, describing what was running and how quickly the breaker tripped can help narrow down the cause. What causes a breaker to trip? A circuit breaker is designed to shut off power to protect the circuit. Common reasons it trips include: Too much on one circuit. Two appliances running at the same time can draw more power than the circuit can safely handle. Outlets on different walls can still share a circuit.A problem with an appliance. If the breaker trips whenever the same appliance starts, the appliance or its cord could be involved.An electrical fault. A short circuit, ground fault, or damaged wiring can cause a breaker to trip. An electrician can determine whether the problem is with the wiring, a device on the circuit, or the breaker itself. What should you do if it keeps happening? When a breaker trips repeatedly, it’s doing what [...]

REQUEST FOR QUOTE

Tell us about your project or service needs. Our team is ready to assist.




OFFICE LINE

305-971-0883

OFFICE HOURS

7:00am – 5:00pm

OFFICE LINE

OFFICE HOURS

7:00am – 5:00pm

Go to Top